![[USW-Flex-XG] Ubiquiti Networks UniFi Switch Flex XG 4-Port 10G Managed Network Switch](http://store.daanish.com/cdn/shop/files/1_728699d1-ee57-4001-8730-deaa171c118e_large.webp?v=1713418080 "[USW-Flex-XG] Ubiquiti Networks UniFi Switch Flex XG 4-Port 10G Managed Network Switch")
![[USW-Flex-XG] Ubiquiti Networks UniFi Switch Flex XG 4-Port 10G Managed Network Switch](http://store.daanish.com/cdn/shop/files/11_9eec306c-dc9d-48ee-a43a-7f120737e021_large.webp?v=1713418080 "[USW-Flex-XG] Ubiquiti Networks UniFi Switch Flex XG 4-Port 10G Managed Network Switch")
A compact, 5-port, Layer 2 switch that supports 10 GbE speeds and can be powered with PoE or a 5V USB-C adapter.
(4) 10 GbE ports
(1) GbE PoE+ input port for power
Installation Guide:
Technical Specifications:
|
|
MECHNICAL |
|
Dimensions |
135 x 185 x 32 mm (5.3 x 7.3 x 1.3") |
|
Weight |
1.2 kg (2.7 lb) |
|
Enclosure material |
Polycarbonate |
|
|
HARDWARE |
|
Management interface |
Ethernet In-Band |
|
Networking interface |
(1) GbE, PoE+ RJ45 port (4) 10 GbE RJ45 ports |
|
PoE interface |
(4) PoE/PoE+ (Pins 1, 2+; 3, 6-) |
|
Total non-blocking throughput |
41 Gbps |
|
Switching capacity |
82 Gbps |
|
Forwarding rate |
61.012 Mpps |
|
Power method |
(1) PoE+, 50—57V DC, 25W (1) USB Type-C, 5V DC, 5A |
|
Power supply |
PoE+ (Pins 1, 2+/3, 6- or 4, 5+/7, 8-) |
|
Supported voltage range |
90—264V AC (Adapter) |
|
Max. power consumption |
25W |
|
ESD/EMP protection |
Air: ± 16kV, contact: ± 12kV |
|
Max. PoE+ wattage per port by PSE |
PoE+: 30W |
|
Button |
Factory reset |
|
Ambient operating temperature |
-5 to 45° C (23 to 113° F) |
|
Ambient operating humidity |
10 to 90% Noncondensing |
|
Certifications |
CE, FCC, IC |
|
|
SWITCHING FEATURES |
|
Layer 2 features |
IGMP snooping STP / RSTP with priorities and port-level disable Port isolation Storm control Voice VLAN Port mirroring LACP port aggregation Multicast / broadcast rate limiting MAC address blocking Flow control 802.1X control Jumbo frames Proprietary loop protection DHCP snooping / guarding Egress rate limit LLDP-MED Port restricted by MAC Device isolation with ACLs |
|
Layer 3 features |
- |
|
|
LEDs |
|
System |
Status |
|
Ethernet |
PoE Speed/link/activity |
|
|
APPLICATION REQUIRNMENTS |
|
UniFi networks |
Version 6.1.67 and later |
- Choosing a selection results in a full page refresh.